Q: How much is a water cutting machine?

Answer: In the early stage, it is necessary to estimate the customer's construction environment, technical requirements, etc., then determine the type of machine to be used based on the technician's on-site inspection. Finally, a comprehensive analysis is conducted to obtain a better cutting solution construction price.

Q: What are the application areas of water cutting equipment?

Answer: It can be applied in industries such as petroleum, chemical, coal mining, law enforcement, civilian use. Widely used in the fields of police explosive discharge, rescue obstacle breaking, petroleum industry, chemical industry, cutting, dismantling, maintenance of waste military equipment, oil tanks, pipelines, other related dangerous goods. It can also be applied to various forms of dismantling operations in coal mines, as well as various non hot cutting industry operations, such as cutting of ship external attachments, cutting of flammable explosive materials, etc., has achieved good application results.

Q: What materials can be cut by water cutting?

Answer: It can cut any material with a thickness of 0-180mm (excluding diamond special hard alloys), is widely used in cutting operations in various non moving open flame environments.

Q: The equipment is called water cutting. Is pure water cutting used? What is the pressure of water required to cut metal?

Answer: Water cutting is not pure water cutting, special abrasives need to be added to high-pressure water. The main engine pressure of our company's gasoline engine drive system can reach 35MPa, while the main engine pressure of the motor-driven system can reach up to 60MPa.

Q: Does water cutting require mixed abrasives?

Answer: Water cutting requires a mixture of abrasives, using natural garnet with a Mohs hardness greater than 7.5 as the abrasive. The cutting process is efficient, environmentally friendly, cost-effective.

Q: Are there any requirements for the water source needed for cutting with water?

Answer: The water source used for the equipment is usually tap water. The equipment is equipped with a filtration system inside, which can filter the water source. If there is no tap water on the construction site, a water source that meets the domestic water requirements or a water storage system can be used.

Q: Does water cutting consume a lot of water s?

Answer: The water consumption for water cutting is 10L/min, the s consumption is 0.5-1kg/min.

Q: Can used abrasives be recycled?

Answer: Hello: Used abrasives can be recycled in principle, but they need to be filtered. If the filtration is not good, it is easy to clog the nozzle, so we do not advocate recycling.

Q: I am familiar with water cutting have seen water cutting with a large volume inconvenient transportation before. Can your company's equipment solve this problem?

Answer: Hello, our company is a portable water cutting advocate. The equipment is small in size light in weight. For example, the QSM-50-15-BH equipment weighs only 260kg per unit, is 1.1 meters long, 42 centimeters wide, 80 centimeters high, making it more convenient to move or transport.

Q: If we have to work in the field it's inconvenient to connect to electricity, does your company have a solution?

Answer: Hello, our company's water cutting equipment has gasoline engine driven products. In cases where it is inconvenient to connect electricity in the field, a fuel engine can be used as the power source for the equipment.

Question: Water cutting belongs to high-pressure operation, is there any danger?

Answer: Hello, the working pressure of our company's equipment is 25MPa~50MPa. During operation, operators must wear the protective equipment provided by our company. As long as the equipment is not facing the nozzle directly is at a distance of 2 meters from the reflected jet during operation, it will not cause harm to the human body.

Q: The cutting pressure of large-scale water cutting can reach 300MPa, while your water cutting seems to be only 50MPa. Can it achieve the same effect as large-scale water cutting?

Answer: Hello, large-scale water cutting belongs to the rear mixing water cutting. Our company's water cutting belongs to the front mixing water cutting. The rear mixing water cutting consumes a lot of energy when s water are mixed, while the front mixing water cutting can fully utilize the energy. Experiments have shown that for cutting or rust removal of the same object, the working pressure required for pre mixed water cutting is only 1/3 to 1/10 of that for post mixed water cutting.

Q: What are the vulnerable parts of water cutting equipment?

Answer: Hello, the vulnerable parts of our company's water cutting are mainly the nozzle. After using the nozzle for a period of time, the outlet hole will become larger, causing a decrease in pressure. Therefore, if necessary, the nozzle needs to be replaced.

Q: Is the equipment explosion-proof?

Answer: Hello, our company's motor driven host equipment uses Exd Ⅱ CT4 explosion-proof motors Exd Ⅰ coal mine specific explosion-proof motors, which have been certified qualified by the National Explosion proof Inspection Center the Coal Mine Safety Mark Center.

Q: Can water cutting cut oil storage tanks? Is there any danger?

Answer: Hello: Our water cutting belongs to cold cutting, with no high temperature, no open flame, no derivatives during the cutting process. It has been applied in the field of oil tank cutting multiple times can safely efficiently complete tasks.

Q: During maintenance in our company, there are some areas where hot work cannot be carried out. In this case, water cutting is used, but our frequency of use is very low. Can your company provide services for situations like this?

Answer: Hello, our company provides engineering services equipment leasing. You can contact our responsible person for relevant matters.

Q: Is the device complex to operate?

Answer: Hello, our company's equipment is small in size, light in weight, easy to operate. We will provide operational training to our customers to ensure that they can proficiently operate the equipment.

Q: What is the width of the water cutting seam?

Answer: Hello, the cutting accuracy of our portable water cutting equipment is determined by the size of the nozzle aperture, the cutting width is generally around 0.8mm~1.2mm.

Q: How long is the warranty period for the equipment?

Answer: Hello, our company provides a one-year warranty period.

Q: How is the cutting efficiency cost of water cutting compared to flame cutting or plasma cutting?

Answer: Hello, water cutting has lower efficiency higher cost compared to flame cutting or plasma cutting. But our water cutting belongs to cold cutting, which does not produce high-temperature deformation has no residual waste residue. It is safe environmentally friendly, the cutting seam is narrow, the cutting surface is smooth, there is no need for secondary processing.

Q: How long can the water cutting nozzle be used?

Answer: Hello, the factors affecting the use of nozzles include different abrasive ss, installation accuracy, usage methods, the influence of the nozzle itself. Normal use is generally around 200 hours.

Question: Apart from being able to cut materials, are there any other uses for water cutting?

Answer: Hello, our company's equipment can also be used for rust removal, paint removal, cleaning small advertisements on walls. Compared with traditional high-pressure cleaning, our cleaning is mixed with abrasives, so the cleaning effect is better.

Q: What is the cutting speed of water cutting equipment?

Answer: Hello, the cutting speed of water cutting equipment is affected by the material thickness of different cutting objects. The thinner the object, the faster the cutting speed. Generally, taking 10mm ordinary carbon steel plate as an example, the cutting speed at a pressure of 50MPa can reach 100mm/min.

Q: Will water cutting equipment explode if the pressure is too high?

Answer: Hello, our company's equipment has a complete pressure control device. Once the pressure exceeds its operating pressure, it will automatically release pressure to reduce the internal pressure maintain the normal working pressure of the equipment.

Q: How can I become a sales agent for your company?

Answer: Hello, our company is recruiting sales agents. You can contact us by phone for further discussion.